SCREEN-PRINTING SOLUTION

JUKI screen-printers represent worldwide proven machines of the highest quality with a sturdy long-life machine design. The screen-printers are available for different PCB sizes and are applicable with JUKI placement machines as well as JUKI reflow soldering ovens creating individual SMT line solutions.

PMAXII

Screen-Printing Solution

JUKI Screen-Printing Solution - PMAXII

PMAXII

Screen-Printer

Large scale printers such as the PMAXII from JUKI made by GKG are designed for three-shift operation and a long service life with low maintenance requirements. The machine table and squeegee carrier are cast, not welded. Therefore guaranteeing high torsion resistance and ensuring the print accuracy will remain unchanged for years. JUKI’s PMAXII handles large circuit boards of sizes up to 1,220 × 800 mm and has notably specialised on LED-applications.

Long-Lasting Accuracy

The machine table and squeegee carrier are cast, not welded, therefore guaranteeing a high torsion resistance and the print accuracy will remain unchanged for years.

High Flexibility

PMAXII and JUKI Pick and Place machines as well as JUKI Reflow Soldering Ovens enable needs-based, individual SMT line solutions.

Optimised Operation and Maintenance

Straightforward Windows-based operator software enables fast initial training and swift programme creation. A programme change takes about two minutes while a new programme compilation is completed within approximately ten minutes. Large covers and service doors allow for easy access to all assemblies throughout the whole process.

PCB

PCB (L × W) min. 100 × 65 mm / max. 1,220 × 800 mm
PCB Thickness min. 0.4 mm / 10 mm
PCB Margin 5 mm
PCB Weight max. 10 kg

Stencil

Frame Size (L × D) min. 737× 737 mm / max. 1,500 × 1,250 mm
Frame Thickness min. 12 mm / max. 43 mm
Fixed and Interchangeable Frame possible

PCB Handling and Transport

Side Clamp
Retractable Top Clamp (for thin / warped PCB)
Adjustable Clamping Pressure
PCB Feed Height 950 mm +/- 20 mm
Feed / Removal Direction left / right, right / left, left / left, right / right
PCB Width / Thickness Adjustment automatic

Print

Number of Squeegee Heads 2, Contact Pressure Seperately Adjustable
Included Squeegee Lengths 850, 1,250 mm × 60° Metall
Squeegee Contact Pressure 0 – 30 kg
Print Speed 5 – 150 mm per second
Special Squeegee available
Other Squeegee Lengths available

Machine Properties and Dimensions

Print Accuracy ± 25 µm
Cycle Time (without printing and cleaning) < 25 seconds
Dimensions (L × W × H) 2,020 mm × 1,740 mm × 1,528 mm
Weight 1,800 kg

PC and Software

Operating System Windows 7
Interfaces Ethernet, USB, SMEMA, Cogiscan IFSNx / TTC

Operating Requirements

Power Supply 220 V ± 10 %, 50 / 60 Hz AC
Compressed Air 6 Bar
Ambient Conditions 5 – 40° C, 20 – 65 % RH

Standards (selection)

Automatic stencil cleaning, 2D-SPI, PCB vacuum fixation, set of PCB support tools, 3 years of JUKI warranty

Available Options and Accessories (selection)

Grid tools for supporting the PCB

 

Please refer to product specifications for details.
Specifications and design subject to change without notice.