STORAGE SOLUTION

JUKI’s STORAGE SOLUTION offers a range of various intelligent storage solutions for individual component storage requirements. An efficient storage system saves both time and money throughout the whole production process.

 

ISM 400

Storage Solution

 

JUKI Storage Solution - ISM400

ISM 400

Intelligent Storage Management

With the ISM 400 you can flexibly store 7“, 13“ and 15“ reels, trays, tubes, printed circuit boards, well-equipped feeder, solding pastes or screen-printing frames manually and monitor their insertion and extraction. The different configuration possibilities of the ISM 400 satisfy the storage needs of the most varied types of components as well as operational and consumable resources of a modern SMT production. With the help of the optional humidity control module it is possible to constantly adjust and monitor the humidity level within the system.  

Efficiency

Thanks to the supported storage extraction process you are saving valuable time. Time which is normally lost while searching for material when using a traditional racking system. As soon as requirements are entered into the system, red LED signals light up pinpointing each storage location where the material needed for the assignment is located. A green LED signal iluminates as soon as the required material has been properly extracted.

Flexibility

The different configuration possibilities of the ISM 400 satisfy the storage needs of the most varied types of components as well as operational and consumable resources of a modern SMT production. The machine can configure up to 480 different positions for example regarding 7“, 13“ and 15“ reels, trays, tubes, printed circuit boards, well-equipped feeder, solding pastes or screen-printing frames.

Error Elimination

The monitored storage system prevents human allocation errors. Each source of error is entirely eliminated, because every material is scanned as well as photographed and thereby simultaneously verified during import and export. In addition, the internal systems software can report back to the in-house ERP-system on imported material as well as possible missing parts.

Humidity Control Unit

With the help of the optional humidity control module it is possible to constantly adjust and monitor the humidity level within the system. Hereby maintaining an internal environment below 5 % RH and thus protecting sensitive components from humidity. During the whole storage cycle of the component the software keeps record of the predominant humidity.

Dimensions (W × D × H)

1,550 × 810 × 2,200 mm
1,550 × 900 × 2,200 mm*

Weight

350 – 670 kg (depending on configuration)

Storage Possibilities

All different kinds of material such as reels, tubes, tray, frames etc.

Configurable Positions

max. 480

Number of 7″ Reels 8 mm

max. 3,600

Power Consumption

max. 0.2 kWh – 0.6 kWh*

Power Supply

110 – 230 V, 50 / 60 Hz

Control System

Component insertion and extraction manually
LED controls

Options

Humidity control unit (< 5 % humidity)

 

* with humidity control unit

Please refer to product specifications for details.
Specifications and design subject to change without notice.