
INSERTION SOLUTION
JUKIS INSERTION SOLUTION consists of odd-shape placement machines to meet different insertion requirements. JUKI THT machines, which boast high accuracy, speed, reliability and flexibility, can easily automate your hand-mount process.
JM-100
Multi Task Platform
Best speed in this category. Significant speed increase over previous generation. Component insertion time down to 0.6 seconds for
vacuum nozzle and 0.8 seconds for gripper nozzle.
Highest Speed
JUKI’s JM-100 convinces with industry leading speed. The insertion speed of the THT components is 0.6 seconds for the vacuum nozzle and 0.8 seconds for the gripper nozzle.
Recognition of various component heights
The new “Takumi head” has 8 nozzles and is equipped with a height-adjusting laser to optimize speed. This head can handle a wide
range of components while maintaining the maximum speed.
Active Clinching
The new active clinching unit supports turn-in, turn-off and N-bend to prevent components from lifting during the reflow soldering process.
PWB size
1 time clumping 50 × 50 mm ~ 410 × 360 mm
2 times clumping 50 × 50 mm ~ 800 × 360 mm
Component Height
max. 30 mm
Component size
Laser recognition: 0603 (metric) ~ 50 mm (square)
3 D Sensor: 3 mm (square) ~ 40 x 25 mm
Insertion speed
Vacuum: 0.6 sec / part*1 *3 *4
Gripper: 0.8 sec / part*2 *3 *4
Placement accurancy
Laser recognition: ± 0.05 mm (3 σ)
Vision recognition: ± 0.04 mm
Feeder capacity
Tape feeder in case of 8 mm tape: 56
Power supply
200 to 415 V AC 3-phase
Apparent power
1.8 kVA
Operation air pressure
0,5 ± 0,05 MPa
Air consumption
75 L / min
Machine dimension (W × D × H)*5
1,500 × 1,500 × 1,450 mm
Weight (approx.)
1,300 kg
*1 Specification conditions (Applicable part: Aluminum electrolytic capacitor (φ 8 mm), Feeder: two MRF-S, Placement conditions: Simultaneous pick, sequential
insertions using 2 nozzles) *2 Specification conditions (Applicable part: Connector (4 pin), Insertion conditions: 2 sequential picks and insertions using 2 nozzles)
*3 Board transfer and mark recognition time not included *4 When the part height is 16 mm *5 Conveyor height 900 mm
Specifications and design subject to change without notice.